Product Detail

General. The FD 1XBB Vertical Dipole Antenna is designed for low power operations in FM ITEL Band (87,5 –108 MHz). This antenna is composed of one non-corrosive aluminium alloy vertical dipole and a mounting bracket.

Excellent Performance for stereo and SCA operation.

Omni-Directional. The azimuth pattern is normally circular but could be modified by the mounting structure presence. As an option, the circularity of the horizontal pattern in presence of mounting structure can be factory tested.

Antenna systems. Stacking more antennas it's possible to obtain customized patterns, increase the gain and the power handling capacity according to user requirements. Custom patterns, electrical beam tilt and null fill are available upon request.

Broadband. 10 MHz of bandwidth permits channel or broadband operations with multi-channel combiners.

Easy installation. The standard mounting brackets are designed for instant installation on poles with diameters from 32 mm to 90 mm. Special brackets are available upon request.

Water, icing, moisture protection. The input connector is protected against rain and icing by a special housing. The internal balun is also protected against water, icing and moisture ingress by a sealed housing.

State of the art mechanical design, employing the finest materials (stainless steel, non-corrosive aluminium alloy, marine brass, virgin PTFE) resulting in long life service.

Lightning resistance is guaranteed by the DC ground potential of the entire antenna.


	FD 1XBB N Transmitting Antennas
	General. The FD 1XBB Vertical Dipole Antenna is designed for low power operations in FM ITEL Band (87,5 –108 MHz). This antenna is composed of one non-corrosive aluminium alloy vertical dipole and a mounting bracket. Excellent Performance for stereo and SCA operation. Omni-Directional. The azimuth pattern is normally circular but could be modified by the mounting structure presence. As an option, the circularity of the horizontal pattern in presence of mounting structure can be factory tested. Antenna systems. Stacking more antennas it's possible to obtain customized patterns, increase the gain and the power handling capacity according to user requirements. Custom patterns, electrical beam tilt and null fill are available upon request. Broadband. 10 MHz of bandwidth permits channel or broadband operations with multi-channel combiners. Easy installation. The standard mounting brackets are designed for instant installation on poles with diameters from 32 mm to 90 mm. Special brackets are available upon request. Water, icing, moisture protection. The input connector is protected against rain and icing by a special housing. The internal balun is also protected against water, icing and moisture ingress by a sealed housing. State of the art mechanical design, employing the finest materials (stainless steel, non-corrosive aluminium alloy, marine brass, virgin PTFE) resulting in long life service. Lightning resistance is guaranteed by the DC ground potential of the entire antenna.




	FD 1XBB N Transmitting Antennas

	R.F. Data: Frequency Range 87.5 - 108 MHz Bandwidth Broadband Polarization Vertical Connector: FD 1XBB N female FD 1XBB 7/16" FD 1XBB LC FD 1XBB 7/8" Maximum Input Power: FD 1XBB N 0.6 kW FD 1XBB 7/16 1.4 kW FD 1XBB LC 1.6 kW FD 1XBB 7/8 3.5 kW Gain (at mid band, ref. to l/2 dipole) 2.15 dBd VSWR (in the whole band) < 1.3:1 Impedance 50 W Front to back ratio >21 dB Wind load (ref. 150 Km/h): -Frontal 18 Kg -Lateral 26 Kg Grounding Via clamps Mechanicals: Materials: FD 1BB Aluminium FD 1XBB Stainless Steel Pole diameter 32- 90 mm (others on request) Dimensions (HxWxD) 1430x60x824 mm Weight: FD 1BB 4.2 kg FD 1XBB 5.5 kg

	ITEL S.r.l. TELECOMUNICATIONS AND BROADCASTING SERVICES Via Friuli, 6 - 33074 Fontanafredda (PN) - ITALY Tel. +39 0434 997667 - Fax. +39 0434 997687